How to : Canon Pixma iP4000 waste ink absorber full reset

Do you have any problem with your ip4000 canon printer, it show a message that you need to replace the waste ink absorber because full. it says something to contact the canon service center?

Here this manual way step by step to resetting waste ink counter on printer canon iP4000.

1. With the printer plugged in and powered off, press and hold the Resume/Cancel button, then press and hold the Power button. Do not release the buttons. The LED light should be green to indicate that a function is selectable.
2. While holding the Power button, release the Resume/Cancel button, do not release the Power button
3. While holding the Power button, press the Resume/Cancel button 2 times, and then release both the Power and Resume/Cancel buttons. Each time the Resume/Cancel button is pressed, the LED lights alternately in orange and green, starting with orange.
4. When the LED light is green, press the Resume/Cancel button 4 times. Each time the Resume/Cancel button is pressed, the LED lights alternately in orange and green, starting with orange.
5. Press the Power button. The LED lights in green, and the reset is performed. When the operation completes, the printer returns to the menu selection mode automatically
6. Press the power button to exit service mode.

Read More... 

Any Kind of Canon Printer Problems Call Us 
+1-855-517-2433 (Toll Free)