How to : Canon Pixma iP4000 waste ink absorber full reset

Do you have any problem with your ip4000 canon printer, it show a message that you need to replace the waste ink absorber because full. it says something to contact the canon service center?

Here this manual way step by step to resetting waste ink counter on printer canon iP4000.

1. With the printer plugged in and powered off, press and hold the Resume/Cancel button, then press and hold the Power button. Do not release the buttons. The LED light should be green to indicate that a function is selectable.
2. While holding the Power button, release the Resume/Cancel button, do not release the Power button
3. While holding the Power button, press the Resume/Cancel button 2 times, and then release both the Power and Resume/Cancel buttons. Each time the Resume/Cancel button is pressed, the LED lights alternately in orange and green, starting with orange.
4. When the LED light is green, press the Resume/Cancel button 4 times. Each time the Resume/Cancel button is pressed, the LED lights alternately in orange and green, starting with orange.
5. Press the Power button. The LED lights in green, and the reset is performed. When the operation completes, the printer returns to the menu selection mode automatically
6. Press the power button to exit service mode.

Read More... 

Any Kind of Canon Printer Problems Call Us 
+1-855-517-2433 (Toll Free)

Canon Printers - Canon BJ 330 Prints Light

1.     "I have a canon BJ330 that starts printing light and prints nothing. This only happens approx once every 2 months. The unit has ink and it still thinks it's printing but there is no ink on the paper. This has happened a couple of times and so far I haven't figured out what it is that I do to 'correct' the problem. 
I was thinking that there must be a way to clean the printhead that is not in the service manual. Which I do not have, anyway."

On my DeskJet, I just blow gently into the vent hole on the ink cartridge. I then wipe off blob of ink that forms on on the head and it works like a charm - if you don't get ink all over everything. Perhaps, try the following first:

Remove the sponge from the purge cap carefully, try washing in water carefully, and reinstall it:

·         Remove the top cover to expose the printer power on the printer when the printhead moves away from home position SHUT OFF the power

·         You will see a rubber rectangle cap towards the bottom of it is the sponge (called an 'Ink Absorber')
Read More... 

Any Kind of Canon Printer Problems Call Us 
+1-855-517-2433 (Toll Free)

How to Diagnose Canon Printer Problems

How to Diagnose Canon Printer Problems

Canon is one of the largest manufacturers of printers and copiers for home and office use. Canon printers come in several types and models, including laser, inkjet, photo and the very popular all-in-one printers that copy, scan, print and fax. As with all technical equipment, printers can misbehave. Follow the steps below to diagnose Canon printer problems.

Instructions

1.     General Issues

Check for a paper jam. Paper jams occur when one or more sheets of paper become stuck in the feeding or printing mechanism. Gently remove any jammed paper and reset the printer.

Check ink levels. Those ink cartridges run out fast. If your printer looks like it is printing but nothing comes out on the page, you might be out of ink. Try replacing the cartridge and printing again.

Check for a clogged print head. If you know you have ink, the print head might be clogged. Navigate to "Control Panel > Printer > Right Click > Properties > Maintenance > Clean Cartridges" to attempt to clean the print head.

Reinstall printer drivers and software. If none of the above helps, try uninstalling and reinstalling the printer and software to correct possible software bugs, errors or conflicts.

2.     Canon-Specific Issues

Check printer drivers. Navigate to "Control Panel > Printers > Right Click > Properties > Update Driver" to check for a new driver for your printer. You can also find drivers and software on the Canon Support site (see Resources).

Resolve the Waste Ink Error. Press menu on the printer and press scan/copy to enter service more. Press the right arrow to access "NVRAM." Set ABS-M level to 0. Set ABS-P level to 0. Press "Stop" to exit.

Resolve Wrong Cartridge Message. Turn off the printer and unplug the power cord. Remove the cartridges and the print head. Clean the print head in lukewarm water. Set it aside to dry. Clean the contacts gently with an eraser and wipe with a tissue. Reinstall the print head and reinsert the cartridges. Run a cartridge alignment.

Resolve E0D02 error. Clean the cartridges and the sender strip. The sender strip is behind the rubber drive belt behind the main hatch. It runs horizontally across the machine. Wipe it gently with a lint free cloth.
Read More... 

Any Kind of Canon Printer Problems Call Us 
+1-855-517-2433 (Toll Free)